Repertoire / Rider
Vote – AVAILABLE FOR TOURING
interactive political dance theatre
Size: 12m width x 12m depth, height min. 4,5m
Black dancecarpet, the floor of the stage can’t be inclined.
At the rear we need a black backdrop, on this drop around the middle we need a 2m wide hole.
On the two sides of the stage we’re useing curtain legs in perpendicular lines, including
5 slots for the frame of the lighting.
minimum 3 x 63A power supply
56 x 2kW dimmer channel
Compulite lighting desk
35 x PC 1 kW (with barndoors)
11 x Fresnel 2 kW (with barndoors)
1 x Profile zoom 2kW (wide angle)
10 x Profile zoom 1kW (5 wide and 5 narrow angle)
32 x PAR 64 (CP62)
5pcs lighting frame on one side and other 5 on the other side, three height can be hung on this frame.
from the front we useing 4pcs PC lamp on the floor, without stands . The distance have to be corresponding to the first row and to the auditorium in front of the stage
we have to solve the controlling of the public lights from the lighting desk.
color filters: LEE243, 201, 203, 152, 106, 156, frost
High-quality stereo system with at least 2kW output, completed the stage and auditorium with rear speaker.
The rear speakers on the stage have to put in the back corners behind the backcorner and the rear speakers of the auditorium shall be placed behind of the spectators.
The Aux output will controlling these peakers.
The power of the sound must be working on a separate phase from the phase of lighting.
Mixer: minimum 6 mono or 3 stereo channel (we prefer the stereo channel solution)
we need mute funcion and 2 Aux output
Specimins: 3pcs CD player (with Auto Cue funcion)
Others: 2pcs Dibox (if the third CD player replace to a laptop)
The sound and light controlling have to be near together.
We will be projecting the state of the voteing above the stage. We will hanging a screen on the first point where we can do it, above the first line of the stage.
For the projection we will take our rolling screen and laptop. But, we need a projector (with hanging structure) and VGA cable to the projector from the control room.
If we can’t do the projection (in small space), we will take our plasma tv.
The height of the auditorium has to be enough for the hanging of the screen while it doesn’t disturb the visibility of the stage.
On the stage during the performence the dancers rolling out a lot of ballbubbles (some of these will trampling too).
After the performance, you should attempt to picking up the bubbles immediately (cleaned).
Wee need full dark in the room.
The viewing area is to be inclined and fixed seats.
We need a direct power access (on the same phase with the video).
We need the exact technical drawing of the auditoriumh with dimensions and seats (chairs and seats number),
Photographs of the chairs and the lines between the chairs and chairs (as soon as possible, response to the rider).
The performance lenght:
probably 80 minutes without break.
8 hours (without the rehearsal)
Necessary local technical staff: 2 lighting technician, 1 sound technician, 1 video technician, 3 decorator (as well as the voting system is required for installation)
60 minutes before the beginning of the performance we need to cleanig the stage.
1pcs projection screen , white (200cm x 200cm is the maximum size)
1pcs plasma tv (127cm) (the box of the tv: 134cm x 82cm x 33cm)
1pcs chair (white leather)
4pcs crates for the voting system (UTP cables, hubs, switches, boxes)
3 cardboard boxes ballbubbles (two type of this)
a lot of nuance in a crates
dresses (in a large bag) + in an other one there is the boots and a teddy bear
3 dancers (female)
2 dancers (male)
3 technician (male)
1 manager (female)
1 director (female)
Number of travelers:
3 car or minibus and 1 car